How to Connect AirPods to Your Windows PC the Right Way

At times, you may want to connect your AirPods to your Windows PC instead of your iPhone.You may be asking yourself-can I connect Airpods to PC? Although designed primarily for use with Apple devices, AirPods can actually be used with any Bluetooth-enabled device, including PCs. However, connecting your AirPods to your personal computer can be a little bit tricky and may require some extra steps. Here’s a quick guide on how to connect AirPods to your Windows PC the right way.

Before You Begin

Before you begin, make sure that your AirPods are charged and in their case. If they’re not, put them in their case and close the lid. Then, connect the case to a power source using the Lightning cable.

If you’re using a Windows 10 PC, you can check the battery level of your AirPods by going to Settings > Devices > Bluetooth & other devices. Under “Other Devices,” look for your AirPods and check the “Battery level” section.

1. Enable Bluetooth on Your PC

The first step is to enable Bluetooth on your Windows PC. To do this, go to Settings > Devices > Bluetooth & other devices. Then, turn on the “Bluetooth” switch.

2. Put Your AirPods in Pairing Mode

Once Bluetooth is enabled on your PC, you’ll need to put your AirPods in pairing mode. To do this, open the lid of the charging case and press and hold the setup button on the back of the case for about 15 seconds.

You’ll know that your AirPods are in pairing mode when the LED light inside the case flashes white.

3. Connect Your AirPods to Your PC

With your AirPods in pairing mode, go back to the Bluetooth settings on your PC. Your AirPods should now appear under the “Other devices” section. Select them and click “Pair.”

Once they’re paired, you’ll see a “Connected” status next to your AirPods in the Bluetooth settings.

4. Use Your AirPods with Your PC

Now that your AirPods are successfully connected to your PC, you can start using them! You can use them for phone calls, listening to music, or anything else you would normally use them for.

Adjusting the Volume of your AirPods on Your PC

To adjust the volume of your AirPods, use the volume controls on your PC. You can also use the inline remote on the charging case to control playback, pause, and skip tracks.

If you’re not using your AirPods and you want to disconnect them from your PC, simply put them back in their case and close the lid. This will automatically disconnect them from your PC.

Keep in mind that you can only connect your AirPods to one device at a time. So, if you want to use them with your iPhone, you’ll need to first disconnect them from your PC.

Troubleshooting Tips if Your AirPods Don't Connect

If your AirPods don’t seem to be connecting to your PC, there are a few things you can try.

First, make sure that your AirPods are in pairing mode. If they’re not, put them back in their case and hold down the setup button for about 15 seconds.

Next, check the Bluetooth settings on your PC to make sure that Bluetooth is turned on. If it’s not, turn it on and try connecting your AirPods again.

If your AirPods still won’t connect, try restarting your PC. This can often fix minor software glitches that can prevent devices from connecting properly.

Finally, if none of these tips work, try resetting your AirPods. To do this, hold down the setup button on the back of the charging case for about 15 seconds. Then, reconnect your AirPods to your PC and see if that fixes the problem.

If you’re still having trouble connecting your AirPods to your PC, contact Apple Support or Microsoft Support for more help.

Frequently Asked Question

1. Can I use my AirPods with more than one device?

Yes, you can use your AirPods with multiple devices. However, you can only connect them to one device at a time. So, if you want to use them with your iPhone, you’ll need to first disconnect them from your PC.

2. Do I need to use a special charger for my AirPods?

No, you can use the same charger that you use for your iPhone. The AirPods come with a Lightning connector, so you can just plug them into the Lightning port on your charger.

3. How can I check the battery level of my AirPods?

To check the battery level of your AirPods, go to Settings > Devices > Bluetooth & other devices. Then, under “Other Devices,” look for your AirPods and check the “Battery level” section.

4. What do I do if my AirPods are lost or stolen?

If your AirPods are lost or stolen, you can use the “Find My iPhone” feature to track them down. Just go to Settings > Devices > Bluetooth & other devices and look for your AirPods under the “My Devices” section. However, you must be connected to the internet in order for this to work.

5. How can I clean my AirPods?

To clean your AirPods, just use a soft, dry, lint-free cloth. Avoid getting any moisture on the charging case or on the AirPods themselves. You can also use a toothpick to remove any dirt or debris from the AirPods’ charging port.

6. Do I need to worry about water damage?

No, you don’t need to worry about water damage. The AirPods are designed to be resistant to sweat and water. However, you should avoid using them in salt water or chlorinated water.

7. Can I use my AirPods while I'm exercising?

Yes, you can use your AirPods while you’re exercising. However, you may want to consider getting some sweat-resistant ear tips to help keep them in place.

8. Will my AirPods fall out if I'm running?

No, your AirPods shouldn’t fall out if you’re running. However, they may come loose if you’re sweating a lot. In this case, you may want to consider getting some sweat-resistant ear tips to help keep them in place.

9. How can I extend the battery life of my AirPods?

There are a few things you can do to extend the battery life of your AirPods. First, make sure that you’re not using them while they’re charging. Second, avoid using them in hot or cold weather. Third, try to keep the charging case away from direct sunlight. Fourth, don’t store your AirPods in their case for extended periods of time. Finally, if you’re not using them, make sure to turn them off.

10. Do I need to worry about losing my AirPods?

No, you don’t need to worry about losing your AirPods. The charging case has a built-in tracker that can help you locate them if they’re ever lost. Additionally, the “Find My iPhone” feature can also be used to track down your AirPods.

Final Verdict

If you’re looking for a way to connect your AirPods to your Windows PC, make sure to follow the tips in this guide. By doing so, you’ll be able to ensure that your AirPods are able to connect properly and that you can enjoy all of their features. Thanks for reading and we hope our guide was helpful!

Disclosure: I may receive affiliate compensation for some of the links below at no cost to you if you decide to purchase a paid plan. You can read our affiliate disclosure in our privacy policy. This site is not intending to provide financial advice. This is for entertainment only.

Disclosure: Some of the links in this article may be affiliate links, which can provide compensation to me at no cost to you if you decide to purchase a paid plan. These are products I’ve personally used and stand behind. This site is not intended to provide financial advice and is for entertainment only. You can read our affiliate disclosure in our privacy policy.

Table of Contents

Related Articles

Is JBL Better than Audio-Technica?

When buying a headset, there are various factors that you will be taking into consideration, and among them include the sound quality that the headset

Leave a Comment

Your email address will not be published.